Smart Systems
Smart systems
Monitoring and automation for real work processes.
ND Smart Systems is a Montevideo, Uruguay–based division of ND Product Lab. We develop connected devices, smart monitoring systems and industrial automation interfaces for environmental conditions, equipment and material flow in agriculture, wineries, warehouses and industrial facilities.
Discuss a system›
ND Smart Systems
July 27, 2026
35Total32Online3Offline
High humidityStorage · 18:00
Gas sensorKitchen · 17:58
Filter serviceDehumidifier · 17:45
All alarms→Temperature (°C)Humidity (%)
20212223242526
Away for a week
Enable all dehumidifiers
Night mode22:00–06:00
Sensor diagnostics→
01
Wine warehouse climate control
- 14.0 °CStorage temperature
- 68 %Relative humidity
- StableAir exchange
Continuous monitoring and automatic climate control protect wine quality during storage and aging.
View module02
Smart irrigation
- 2 / 8Zones active
- 1h 20mRuntime
- 24.3 mmWater used
Automated watering schedules based on soil data and weather.
View module03
Grain & material flow
- 78 %Silo 1 level
- 4.2 t/hFlow rate
- RunningConveyor
Track levels and control flow to optimize throughput.
View module04
Winery process support
- 15.2 °CFermentation temp.
- In progressFermentation
- 82 %Tank fill level
Monitor fermentation and storage conditions with precision.
View moduleHome & apartment control
A healthy home. Protected every day.
One interface brings together indoor climate, dehumidifiers, safety sensors and cameras. The solution is especially relevant for homes and apartments in Montevideo and coastal Uruguay, where remote humidity control helps protect health, equipment and interiors.
NDApartment control
All systems normal
For health & safety
Stable humidity and clean air help reduce dampness, mold and allergens. A gas sensor monitors the room continuously and immediately warns about a possible leak or dangerous concentration.
For equipment safety
Leak sensors warn about water before it damages appliances, electronics, furniture or engineering systems.
For the property
Automatic dehumidification protects walls, furniture, textiles and stored belongings from condensation, corrosion and prolonged humidity. A water sensor detects leaks immediately, sends an alert and can automatically shut off the water supply.
Away mode
Leave for months without leaving the apartment unattended.
The system continues to monitor humidity, temperature, leaks, gas, power and doors. You can remotely start a dehumidifier, change its target level, check the cameras or allow a trusted person temporary access.
- Automatic activation when humidity rises
- Instant alerts to your phone
- Equipment status and energy use
- Event history for the entire trip
Apartment · Montevideo
Connected
Away mode active42 days
Last checkEverything is normal · 2 min ago
Solutions for Uruguay
One platform. Built around each real process.
Developed locally in Montevideo, the same control architecture can serve a farm, winery, warehouse, solar installation or hotel anywhere in Uruguay. Sensors and equipment are selected for each real task, while the interface follows the way people actually work.
01
Water infrastructure
Tanks, wells and pumps under continuous control.
A practical system for farms, vineyards, nurseries, rural homes and small production sites. It shows where water is available, how it moves and whether the equipment is operating safely.
- LevelsWater level in every tank and reservoir.
- Pump protectionDry run, overload and abnormal pressure detection.
- Automatic supplyFilling, transfer and reserve switching by scenario.
- Leak alertsFlow analysis and instant notification of losses.
For: farms, vineyards, nurseries, rural properties, workshops and residential complexes.
Water networkAutomatic
Main tank84%
Well3.2 bar
Reserve61%
Flow4.8 m³/hPump P-01RunningToday18.4 m³
Reserve tank will be filled automatically at 40%.
02
Cold storage & transport
Protect every batch from temperature loss.
Continuous monitoring for cold rooms, freezers and refrigerated transport. The system records conditions, detects deviations and warns before products or equipment are at risk.
- Temperature historyCharts and reports for every room and delivery.
- Door controlAlerts when a cold-room door stays open.
- Equipment healthCompressor, power, defrost and filter status.
- Compliance reportsA documented history of storage conditions.
For: meat, dairy, cheese, wine, fruit, vegetables, restaurants and pharmaceuticals.
Cold rooms4 online
CR-012.4 °CCR-023.1 °CCR-036.8 °CFREEZER−18.2 °C
Last 24 hours
CR-03 door has been open for 7 minutes.
03
Livestock & dairy farms
Reliable water, ventilation and milk cooling.
The first stage does not require expensive animal tracking. The system can begin with essential infrastructure: water troughs, wells, pumps, ventilation, milk tanks and backup power.
- Animal water supplyTank and trough level monitoring.
- Milk coolingTemperature, agitator and compressor status.
- Barn climateHeat, humidity and automatic ventilation.
- Power lossImmediate alerts and generator supervision.
For: dairy farms, cattle farms, poultry houses, feed areas and rural facilities.
Farm overviewNormal
Milk tank3.6 °CCoolingMain trough92%Level stableBarn 0223.1 °CFans 2 / 4
Water today12.8 m³PowerStableAlerts0
Milk reached the target temperature in 38 minutes.
Smart winery control
From vineyard to bottle — the entire winery in one interface.
For wineries in Canelones, Montevideo and other wine regions of Uruguay, sensors, tanks, pumps, cellar climate and production records are combined into one process map. The team sees the current state, receives alerts and keeps the history of every batch.
01VineyardSoil · weather · irrigation
02ReceptionWeight · variety · °Brix
03FermentationTemperature · density
04AgingTanks · barrels · cellar
05StorageClimate · lots · dispatch
TANK F-03 · TANNAT 2026Active fermentation
78%
Temperature24.6 °CSetpoint 24.0 °C
Density1.042g/cm³
Elapsed5 d 14 hStarted 18 Feb
CoolingRunningValve open
Temperature and density
Fermentation control
Temperature, density, cooling, mixing and the complete event history.
Tank & flow management
Fill levels, pumps, valves and safe product routing between tanks.
Cellar climate
Temperature, humidity, ventilation, doors, leaks and refrigeration equipment.
Vineyard & harvest
Plots, irrigation, weather, reception weight, variety and sugar level.
Water & cleaning
Water use, tank cleaning cycles, temperature, dosing and sanitation records.
Alerts & reports
Actionable warnings, responsible staff, process history and PDF reports.
Start small. Connect one tank and the wine cellar first, then add pumps, production areas, traceability and the vineyard.
Discuss a winery system›
05
Smart irrigation
Apply water where and when it is needed.
The system combines soil moisture, weather, pressure and flow data to run irrigation zones by schedule or actual field conditions.
- Field zonesIndividual rules and schedules for every crop.
- Soil dataMoisture and temperature at different depths.
- Weather logicPause watering after rain or during strong wind.
- Water accountingActual consumption by zone, day and season.
For: vineyards, horticulture, greenhouses, orchards, pastures and landscaping.
Irrigation plan2 zones active
ZONE 0131%WateringZONE 0247%Scheduled 19:30ZONE 0328%WateringZONE 0454%No watering
Pressure3.8 barToday24.3 mmRain chance12%
Zone 02 moved to evening because of high daytime temperature.
06
Solar & energy monitoring
See generation, consumption and savings in real time.
A unified dashboard for solar panels, inverters, batteries, grid exchange and site loads. It helps owners understand energy flow and service teams find faults faster.
- Live energy flowSolar, battery, building and grid on one diagram.
- Inverter healthEfficiency, temperature, errors and availability.
- SavingsSelf-consumption, grid export and avoided cost.
- ReportsDaily, monthly and annual generation data.
For: farms, warehouses, hotels, factories, offices and residential installations.
Energy flowGenerating
Solar18.4 kWBuilding11.2 kWGrid export7.2 kW
Generation today
Today96.7 kWhSelf-use61%Inverters3 / 3
07
Grain, feed & silos
Know the level, condition and movement of material.
The system monitors storage conditions and controls conveyors, augers, gates and ventilation. Operators see where every batch is located and how the material is moving.
- Silo levelCurrent volume and remaining capacity.
- Storage conditionTemperature, humidity and ventilation.
- Material routesSafe routing through conveyors and gates.
- ThroughputFlow rate, runtime and stoppage history.
For: grain storage, feed mills, farms, terminals and small processing facilities.
Storage overviewRoute active
SILO 0178%SILO 0246%SILO 0391%
Flow rate4.2 t/hConveyorRunningGrain temp.18.9 °C
Material is routed from intake to Silo 02 without conflicts.
08
Forestry & timber processing
Stable drying, safer equipment and lower fire risk.
Monitoring for timber yards, sawmills and drying kilns. The system records moisture and temperature, supervises fans and heaters, and detects dangerous conditions early.
- Drying programsTemperature and humidity curves by wood type.
- Equipment statusFans, heaters, dampers and motors.
- Fire preventionHeat, smoke and abnormal temperature rise.
- Batch historyA complete drying record for every load.
For: sawmills, drying facilities, timber warehouses and woodworking companies.
Kiln 02Cycle running
58.4 °CWood moisture18.2%Target12.0%Remaining11 h 40 m
Drying curve
All fans are running. Temperature rise is within the program.
09
Warehouses & logistics
One view across storage zones, utilities and equipment.
A central interface for warehouses, distribution centers and mixed-use logistics sites. It combines climate, doors, refrigeration, lighting, power and technical alarms.
- Zone overviewStatus and conditions across all storage areas.
- Doors & accessOpen time, access events and night mode.
- Energy controlLighting, refrigeration and peak demand.
- MaintenanceRuntime, filter service and fault history.
For: distribution centers, free-zone warehouses, ports, workshops and industrial parks.
Distribution center32 devices online
ZONE A20.1 °CNormalZONE B18.3 °CNormalCOLD 013.2 °CCoolingDOCK 04Open06:42
Power84 kWGates open2 / 8Active alerts1
Dock 04 has remained open longer than the configured limit.
10
Hotels & rural complexes
Comfort for guests. Control for the owner.
A simple property interface for climate, hot water, pools, pumps, lighting, access and energy. Technical staff receive precise alerts while management sees consumption and the overall condition of the site.
- Guest comfortRoom climate and hot-water availability.
- Pools & pumpsTemperature, circulation, levels and filtration.
- Remote property modeControl during low season or temporary closure.
- EfficiencyWater, electricity and solar generation in one report.
For: hotels, wineries with guest facilities, rural tourism, rental properties and residential complexes.
Property overviewAll systems normal
Rooms occupied18 / 24Hot water61 °CPool27.4 °CSolar today72 kWh
Water today8.2 m³Technical alerts0Night modeScheduled
Pool filtration completed. Water parameters are normal.
Start with one process
The system grows together with the site.
A first project may include only a tank, pump or cold room. New sensors, equipment, rooms and automation scenarios can be connected later without rebuilding the entire interface.
Discuss your process›
How it works
Simple. Connected. Effective.
- Sensors
Collect data from the field.
- Controller
Processes data and runs automation.
- Cloud dashboard
Real-time monitoring and analytics.
- Phone / PC
Access and control from anywhere.
Why smart systems matter.
- Reduce manual checks and routine tasks
- Prevent product loss and downtime
- React faster to failures and deviations
- Keep stable storage and process conditions
- Automate repetitive operations
- Monitor multiple zones remotely
Built for real industries.
About the developer
Designed individually for every project.
I have already created more than 30 applications, many websites, and full visual systems for industrial products. For smart systems I develop the interface and visualization myself, adapting every screen, control and dashboard to a specific task instead of using a generic template.
30+applications built
5+years in design
Networks & systems
specialized education
I live and work in Montevideo, Uruguay, so local conditions and the needs of Uruguayan homes and businesses are considered from the start. The interface, operating logic and system integration are designed with a full understanding of real engineering processes and safety requirements, including sensor states, failure scenarios and protective constraints.
Build a system for your process.
Every operation is unique. From our base in Montevideo, we design smart monitoring and automation systems for homes, wineries, farms and businesses throughout Uruguay.
Contact ND Product Lab